Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Austin, MN

Fleet Washing in Austin, MN

On-site washing for company trucks, vans, trailers and equipment, scheduled at your yard. Typical cost $150-$800.

The secret to fleet washing is using the right method, not the most pressure. In Austin, MN, we match the cleaner and pressure to the surface so it comes out clean without damage.

Method and pressure

Mobile washCleaning method

Signs you need fleet washing

  • Dirty company vehicles representing your brand
  • Road salt build-up in winter
  • Equipment caked with mud

Why it gets dirty

  • Road grime and salt
  • Job-site mud
  • Exhaust soot

Easy upkeep between cleanings

  • Rinse salt off undercarriages often in winter

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Wash water runoff at your yard
  • Damage to decals and seals

What happens on the day

  1. Schedule at your location
  2. Pre-treat
  3. Wash and rinse
  4. Detail wheels and trim
  5. Log the vehicles washed

Fleet Washing cost in Austin, MN

$150-$800Typical range per visit for a small fleet
Depends on fleet sizeTypical time on site
Weekly to monthlyRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Fleet Washing in Austin, MN

Commercial properties in Minnesota usually get a big spring clean of sidewalks, entrances and parking areas to remove sand, salt and winter litter, and many schedule a second visit in the fall.

Crews serve all of Austin (ZIP code 55912), plus Albert Lea (19.7 mi), Dodge Center (25.7 mi), Kasson (27.5 mi) and Stewartville (27.5 mi). Call (555) 010-0000 for a free quote in Austin.

Fleet Washing: frequently asked questions

How much does fleet washing cost in Austin, MN?

Fleet Washing typically costs $150-$800 per visit for a small fleet, and usually takes Depends on fleet size. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for fleet washing?

Fleet Washing is usually done with mobile wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.

Is fleet washing safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule fleet washing?

Weekly to monthly. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Austin, MN

Exterior Mold & Mildew Removal for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$700

Pre-Paint Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $250-$600

Parking Lot & Garage Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $500-$3,000

Exterior Mold & Mildew Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$700

Pre-Paint Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$600

Graffiti Removal

Removing spray paint and marker from brick, concrete, stucco and stone, using removers matched to the surface.

Typical $200-$800

Parking Lot & Garage Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $500-$3,000

Pre-Paint Washing

Washing siding and trim before painting or staining so new paint bonds to a clean surface.

Typical $250-$600

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Pool Deck Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $200-$500

Commercial Pressure Washing

Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours.

Typical $400-$2,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Austin, MN. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote